Save up to 25% on your monthly electric bills!

The Power-Save 1200™ reduces the amount of power drawn from the utility by storing electricity otherwise lost from the motors in your home. The unit supplies this stored electricity back to your appliances, decreasing demand from the utility. Decreasing demand means less usage and lower electric bills!

The easy-to-install Power-Save 1200™ was designed with the homeowner in mind, providing lower energy bills, increased motor and appliance life, for all of the equipment inside of your house.

Residential customers throughout North America could see a realized savings of 8% - 10% up to 25% on their electrical usage (and thus power bills).

The Power-Save 1200™ is UL Certified as the Cat. No. ABET 2201 and CSA certified.

Money isn't all that you are saving when you use Power-Save Energy Corp. products. It's an energy-wise purchasing decision with many positive environmental implications.

Everyone who has an electric bill should own a Power-Save 1200™ energy saver.

• Reduces electrical bills up to 25% per month
• Increases motor and appliance life
• UL Tested and Listed
• CSA certified
• Eliminates power surges
• Reduces 'noise' in the electrical system

How much can I expect to save per month by using the Power-Save?
That depends on many factors. The size of your home, the amount of inductive motor load, and the amount you are paying per kilowatt-hour for electricity etc. However, generally speaking users of the product have seen up to 25% in reduced consumption, but the average savings is somewhere in the 8% to 10% range.

How long will it take for the Power-Save to pay for itself?
Generally about 6-12 months, but again, the same factors above apply, some will see sooner (6 months), some will see later (12 months).

Is the Power-Save easy to Install?
We recommend installation by an electrician. The unit comes with complete installation instructions. It installs in about 20-30 minutes.

How long will the Power-Save last?
It has a predicted lifespan of up to 20 years.

What About Power-Save for Surge Protection?
The Power-Save also protects the entire home against power surges. No longer a need for so many surge protectors in the home. The Power-Save 1200 provides a broad range of protection for hardwired appliances and most home electronics such as televisions, satellite equipment, entertainment systems, etc. The unit protects from power line surges as well as spikes caused by internal wiring problems, loose connections and fluctuating demand from large motors such as appliances, vacuum cleaners, heating and cooling equipment, etc.

Power Save 1200

Video will start automatically

How Does it work?

The unit provides energy savings by reducing the amount of power drawn from your utility with the use of specially designed harmonic resistant capacitors. Power-Save 1200 systems optimize your home's power factor thus reducing the amount of energy your homes motor loads use such as air conditioners, refrigerators, freezers, washers, dryers, dishwashers, pool pumps, vacuum cleaners, furnace blower motors, fans, etc. Motor loads require more energy to do their work compared to other electrical equipment in your home. The Power-Save 1200's "power factor optimization" significantly increases the efficiency of your motor load and stores waste energy resulting in decreased demand and usage of electricity from your utility company. This equates to significant cost savings for you the home owner.

Power factor is the measurement of how efficient your electrical system is using the energy delivered to your home from your utility company. For example, your stove and dryer heating coils and incadescent light bulbs have a "power factor rating" of unity or 1. This equipment converts electric energy to heat and light. Motor loads as described above can have "power factor ratings" as low as .2. This combination of electric loads in American homes results in an average "power factor rating" of .77 or less. the .77 indicates that your home is using more energy than it should to operate your electrical equipment. The Power-Save 1200 technology has a proven track record of increasing a home's "power factor rating" to .95 or better.

Equipment Protection

Power-Save 1200 technology provides Surge and Spike Suppression, a feature that will help protect and extend the useful life of your electrical equipment. Voltage surges and spikes come from many different internal and external sources such as utility grid changes, damaged transformers or electrical lines due to accidents or acts of God, old or out dated utility transformers that supply electrical power to your home, lightning and turning on and off major motor loads in your home. Typical homes in the United States are bombarded with literally hundreds of surges and spikes a day that damage sensitive electrical equipment over time. The external lights on the Power-Save 1200 system provide an easy visual indicator that the system is protecting your home.

Electrical Noise Filtration

Power-Save 1200 technology provides Harmonic Filtration which has become more important since the 1980's and almost mandatory going into the 21st Century due to the proliferation of computers, fax and copy machines and variable frequency drives which are know as "nonlinear loads". "Nonlinear loads" ask for and use electrical current in "pulses" unlike traditional electrical equipment. This pulse use of electrical current creates damaging noise, interference and heat on today's electrical systems causing interference within sensitive electrical equipment or worse causing them to overheat and fail. The use of computerized electronics within the American home has been growing at exponential rates and the need for filtering out the interference, noise and heat created by nonlinear loads has never been greater.